You want peep mirrors, but they are too short? With this 1-1/2" longer extension, that problem has gone away. Chrome plated to match the peep mirror and machined to fit at both ends. 

Mirror not included.

This compact, self-contained wiper motor drives one wiper arm and blade, making it perfect for your early Coupe or Roadster. Has a 90° sweep.

Uses an external switch (not included). Use single control switch 910-64056 if using only 1 kit. Use dual control switch 910-64057 if using 2 kits.

For replacement parts, use blade 911-23506 and arm 911-23505.

• Motor is 12 volt
• Returns to park automatically when shut off
• 90° sweep only
• 11" wiper blade
• Arm is adjustable from 7.5" to 11.75"

Deluxe Electric Wiper Motor Installation Instructions (PDF)

Attaches Speedway 12 volt wipers # 91123501 and 91123502 to windshield frame. Polished aluminum 2-piece clamp mounts to 7/8" diameter round windshield frames, like Model T and Model A Fords use.

These nifty 3-1/2" diameter mirrors clip to your wind wing glass. They work great as a secondary blind-spot mirror, or as an alternative to drilling into your body for a stud mount mirror.

Stainless steel interior oval mirror by Speedway. Mirror glues onto your windshield.

Glue not included.

These Ford closed car exterior rear view mirrors have an adjustable hinge pin mount. They mount to the outside door hinge with a new pin that replaces the original hinge pin. They are all chrome and feature a 4” diameter mirror head and an 5.25” arm for good visibility. Fits all 1932 Ford closed passenger cars except 3-window coupes.

• Works for both left and right sides 
• 1932 Ford closed cars (except 3-windows)
• Chrome finish
•  0.278" Pin O.D.
• 2.015" I.D. Opening for Hinge
• 4" diameter
• 5.25" arm length from center pin to center pivot
• 7.25" long center pin to outer edge mirror

Item Details

These Ford closed car exterior rear view mirrors have an adjustable hinge pin mount. They mount to the outside door hinge with a new pin that replaces the original hinge pin. They are all chrome and feature a 4” diameter mirror head and an 8” arm for good visibility.

• Works for both left and right sides 
  
• 1930-1931 Ford Closed Cars
• Chrome finish
• 0 .228" Pin O.D.
• 1.778" I.D. Opening for Hinge
• 4" diameter
• 8" long arm
  

Item Details

Glue for your interior rear view mirror.

This is garage sale priced because it has been discontinued.

No Warranty, No Returns on Garage Sale Items    

16" x 6". Choose from two colors of wind wing, smoke or clear. Wing wings sold in pairs. 

Replacement Lexan wind wings for your universal wind wing kits. 

• These are 16" tall by 5 7/8" wide
• Thickness: 3/16"
• Center to center of the two sets of mounting holes on the wind wings is 6 ¾"
• One set of holes is 3" from the end of the wing and the other set is 6 ¼"
• Total of 16" in length or height of the wind wing

Universal flat face mirror clamps to door edge. Has a 4" diameter with a 4-1/2" arm.  This mirror is designed for clamping on a door edge or similar component up to 1/8” thick. The mirror head is reversible for use on left or right side.

• Universal application
• 4" diameter
• 4-1/2" arm
• 5-1/2" (from where it bolts to the vehicle to the center of the mount at the end of the arm)
• Clamps to door edge
• Stainless steel mirror face housing with chrome plated cast arm and base
• Hardware included