Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

911-17400 Instructions (PDF)

• 17 Super Bright Red LEDs
• Drivers side (Left side) includes a 4 LED White License Light (primary picture)
• Epoxy coated, fully sealed electronics
• Two 1156 plugs
• Solid state circuit board for 12V systems 

Chrome rim with powerful red LED lights. An excellent replacement for your 1950 Pontiac or custom application.

• 41 super bright red LEDs
• Polished stainless steel housing
• Epoxy coated, fully sealed electronics
• Solid state circuit board for 12V systems

Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

• 28 super-bright LEDs
• Glass lens
• Epoxy coated, fully-sealed electronics
• Stainless steel rim and black housing 

911-37014 Instructions (PDF)

Fully spun, polished brass. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

Note: Bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

911-17420 Instructions (pdf)

Polished stainless steel housing with powerful red LED lights. An excellent replacement or addition to your 1932 Ford Deuce. Choose right or left.

• 17 super bright red LEDs
• 4" diameter
• 3" deep
• Drivers side (Left side) includes a 4 LED white license light
• Polished stainless steel housing
• Epoxy coated, fully sealed electronics
• Solid state circuit board for 12V systems

911-37007 Instructions (PDF)

Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens.

The separate 94-style single filament bulb can be used as a turn signal or park light (not both). This filament appears clear but it glows amber when in use. 

Headlight Wiring Chart (GIF)

Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and a "clear" turn signal lens. Includes a H4 Halogen bulb.

These headlights have a separate filament which can be used as a turn signal or a park light (not both). This filament appears clear, but it glows amber when in use (common 94-stle bulb).

Headlight Wiring Chart (GIF) 

Speedway's 7" traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic reflector with a thick glass lens. Also includes an assortment of colored Tri-Bar dots (light green, dark green, black, orange, and red).

The separate 94-style single filament bulb can be used as a turn signal or park light (not both). 

Headlight Wiring Chart (GIF)

Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

Headlight Wiring Chart (GIF)

Made of polished stainless steel with glass lens. An excellent replacement or addition to your '28-'31 Model 'A'. Choose right or left.

911-27002 Instructions (pdf)

• 19 Super Bright Red LEDs
• Drivers side (Left side) includes a 4 LED White License Light (pictured)
• Epoxy coated, fully sealed electronics
• Two 1156 plugs
• Solid state circuit board for 12V systems 

911-27003 Instructions (pdf)

Each of these complete 1938-39 Ford Mini Zephyr LED Signature Series taillights are optimized for visibility and proper fit on the car. All of our taillights include a pressure cast bezel, a molded-in reflector for lights-off safety, and stainless steel hardware.

Plus, with RapidFire technology, the brake lights are pulsed rapidly three times within the first 1/2 second of pressing the brake pedal followed by constant ON. This cycle is repeated every time the brake pedal is pressed. We think this is a valuable safety feature, but can be overriden at time of installation.

Whether you like it or not, the law says you need a license plate on your car when driving. But they don't say you need one when it's parked. This kit flips the license plate down when you turn the key on and flips it back up when it's turned off. Includes wire, connectors and hardware to install.

• Easy installation – two wires to front of vehicle
• Steel cased motor and steel gears
• Slip clutch incorporated on drive shaft of motor
• Protected for safety by two 10 amp fuses – one in each main wire

910-50149 Instructions (PDF)

These lights are flat on the back for easy mounting to most any surface, as each only needs 3 holes (1/4" Diameter) drilled in the mount surface. Wired for taillight, stoplight, and turn signals. 12V. Includes base gasket.

The sky is the limit on these cool '39 Ford style flaming LED taillights. Sealed LED unit with 3 electrical leads out the back. Light is surface mounted (flat on back side). For attachment, it has 2 studs on the back that will go through existing holes in body or fender and be retained with the provided nuts.

911-37030 Instructions (PDF)

Replacement red glass taillight lens with blue dot for your 1941-1948 Chevy passenger car.

Red glass taillight lens with blue dot for your 1939 Chevy passenger car.

• 2-5/8" in diameter
  
• 3/4" deep
  
• Blue dot it 3/4"
  
• Bezel is 1"

Lens with a built-in LED cluster for 1938-1939 Ford taillight. Red lens only - no bezel. Plugs into existing taillight housing socket.

• 39 Super Bright Red LEDs, Complete with Polycarbonate Lens
• Epoxy Coated, Fully Sealed Electronics, 1157 Plug
• Solid State Circuit Boards are Designed for 7.7 - 14.0 VDC
• DOT/SAE Certified

911-37012 Instructions (pdf)

Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have an amber colored glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a blue dot glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1" diameter, choose red or amber. 1157. 1157 have staggered pins and 2 contacts.

The bulbs appear to be clear, but are the correct color when illuminated.

The bulbs appear to be clear, but are the correct color when illuminated.

Model A taillight bracket only. Taillight is not included. Stamped Steel. Choose left or right. Chrome.

Those other super bright, super high powered taillight bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn paint.

Halogen bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

This bulb is shorter than an 1157 bulb and measures only 1-3/4" from bottom to end of tip. From pin to tip is 1-1/2".

Replacement quartz H-4 12 volt bulb.

Wiring Chart (GIF)

This smooth stainless license plate back adds detail and strength.

• O.D. = 12" X 6"
• Mounting Holes = 7" X 4-3/4"
• Thickness = .047"

These stainless steel headlight mounts are the perfect touch for your fenderless car. Measures 4-3/4" from mounting surface to the top of the headlight cup.

Includes four mounting bolts, but NOT the two rubber gaskets.

These all steel buckets allow you to "French" your 1950 Pontiac taillights into the body. Welding & bodywork required.

Protect your 1938-1939 Ford taillight from dirt, moisture, scratches, and corrosion with this original-style, quality black rubber reproduction gasket.

Sold as a pair.

Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens.

These headlights do have high and low beams, but they DO NOT have turn signals. 

Headlight Wiring Chart (GIF)

Our universal fit Deitz-type 7" headlights feature black painted housings with chrome rings. Has a 12 volt bulb with both Hi & Low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

Choose Standard (Sealed Beam) or Halogen bulb.

Our universal fit Deitz-type 7" headlights feature Stainless Steel housings and a 12 volt bulb with both Hi & Low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

Choose Standard (Sealed Beam) or Halogen bulb.

Small style, 7-1/2" tall with 3" diameter lens. Polished aluminum. Dual element bulb. Choose red, blue dot or amber lens. 12 volts.

Note:  Product does NOT come with brackets.

916-62003 Instructions (pdf)

The clean round shape and domed lens of the 1950 Pontiac taillight has been a staple on hot rods for more than five decades. This beautiful taillight assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This light makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a 1950 Pontiac!

• Classic shape and design
• Easily adaptable to a variety of vehicles
• Red glass lens
• Chrome bezel
• Rubber mount gasket included
• Single 1157 dual-filament bulb

These all steel buckets allow you to "French" your 1938-1939 Ford taillights into the body. Welding & bodywork required.

911-37039 Instructions (PDF)

Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a glass lens, single 1157 dual-filament bulb, mounting gaskets, and match the original tail lights closely.

For 12 volt systems only.

These are an exact duplicate of the original 1932 Ford glass lens taillights. Left light has a lens to illuminate license plate.

Choose left or right. 12 volt. 4" diameter, 3" depth, 3" height.

A perfect finishing touch for any headlight installation. Includes 12" braided stainless sheath with polished aluminum ends to secure headlamps and attach conduit to grille shell, fender or frame. Three-color headlight wires included. 

Bend angle should not exceed 45°. Can be cut to fit.

These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1" diameter, red or amber, and 1156. 1156 have the pins straight across and a single contact.

The bulbs appear to be clear, but are the correct color when illuminated.

Halogen bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

This bulb is shorter than an 1156 bulb and measures only 1-3/4" from bottom to end of tip. From pin to tip is 1-1/2".

NOTE: Be Careful - Quartz Halogen bulbs emit substantial amounts of heat. Best if used with glass lenses and metal housings.

NEVER touch these bulbs with bare fingers! Smudges and skin oil will cause quick bulb failure. Wipe them with a cloth containing rubbing alcohol before use!

Model A taillight bracket only. Taillight is not included. Stamped Steel. Choose left or right. Black finish.

The flange to which the taillight attaches is 2.375" round, with the taillight bolt holes (2 of them, ¼" diameter), horizontal, 1.75" apart.

 The flanges for the taillight and the fender are not parallel, but are the closest at 4.5".

 The fender flange is triangle-shaped, 3.625" wide by 2.75" tall.

 The 3-bolt pattern of the fender flange is 2.25" by 2.25" by 2.875" (1/4" square holes).

Overall height is 5 3/8".

Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left light has lense on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

These taillights have two bulbs in them that are of a single filament style. 

Fully spun, chrome steel. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

911-17401 Instructions (pdf)

Finally an affordable tri-bar headlight! 7" diameter, universal chrome plated steel housing. Uses inexpensive quartz halogen replacment light bulbs. Curved lens is fluted for superior driving vision. Mounting hardware included.

Wiring Chart (GIF)

7" diameter, universal, chrome plated with quartz halogen kit installed. Mounting bolts included. 12 volt.

Wiring Chart (GIF)

Our universal fit Deitz-type 7" headlights feature chrome housings and a 12 volt bulb with both Hi & Low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

Choose Standard (Sealed Beam) or Halogen bulb.

• Map light
• Dash light
• Courtesy lamp

Sold by the pair. White color bulb only.

Speedway's replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic housing with a glass lens. Includes a H4 Halogen bulb.

Headlight Wiring Chart (GIF)

NOTE: These headlights cannot make use of our L.E.D. Turn Signal Indicator for H-4 Bulbs, item # 910-64150.

• Fully polished stainless steel housing
• 12 volt operation
• Mounting hardware included
• Uses common replaceable dashlight bulb #1895

It's really hard to find a good quality chrome license plate frame. These are among the best available.

Use with fasteners at right.

Billet aluminum license plate holder with brushed finish. Includes a 12 volt light with a simple 1-wire hook-up.

• 12-3/8" wide x 6-3/8" high
• Frame Thickness:  1/2"
• Thickness @ Light:  1"
• Light Height:  9/16"