|
|
Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.
|
Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide. Sold in pairs. Item Details1/8" NPT female to -3 AN male
|
Steel 7/16"-24 IFM thread nuts for 1/4" brake line tubing when double flared to 45°.
|
Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.
|
These handy brake line tabs can be bolted or riveted to your frame rather than welded. 5/8" brake line hole with two 3/16" mounting holes. Includes two tabs and two brake line retaining clips. Sold in pairs.
|
Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide. Sold in pairs. Item Details1/8" NPT female to -3 AN male
|
Weld on frame tabs with clips to hold the end of your brake line where the hose attaches. Sold in sets of 4.
|
Our mechanical brake light switch is "closed" in the at rest position. It breaks the circuit when pushed. Mounts near your brake pedal and the arm can be bent as needed. 42 amp max rating. Use for your street rod, truck, or muscle car!
|
Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.
|
|