|
|
Our universal body-to-frame cushioning liner mounts between the body and frame of your hot rod, making it ride as good as it looks. Liner measures 1/8" thick and 2" wide and comes in a 25 ft. length. Has an adhesive tape backing to keep it in place when mounting your body.
|
Speedway Fiberglass bed cover for 20" T Pick-Up bed 900-2020. This cover measures 44-1/2" X 17-1/2". Both measurements are on center.
|
Steel 1930-31 Ford Model A splash apron for radiators. Chopped 3". Measures 3" tall at the center from the bottom to the indention lip for the grille shell. If you add the lip behind the grille shell, it is 4-1/8" from the bottom to the top of the lip. Item Details30-31 Chopped 3", Steel
|
1930-31 Ford Model A steel splash apron for use with 1932 Ford grille shell. Item Details'30-31 Using ''32 Shell, Steel'
|
1930-31 Ford Model A fiberglass splash aprons for use with 1932 Ford grille. Allows use of rack & pinion steering. Comes with a white gelcoat finish ready for paint preparations. This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. Item Details'30-31 Using ''32 Shell, Fiberglass'
|
Speedway Fiberglass 1932 Ford Deuce firewall flat styled for V8 engines. Flat '32 firewall---35 9/16" wide at widest point and 5" down from the top is 35 1/4" wide. 24 1/2" tall. This is designed flat to provide more engine room. Customer will need to leave a section around the firewall opening of the original firewall approximately 1/2" to 3/4" for mounting. If original firewall is missing, customer may need to fabricate a flange to mount this flat firewall to. - UPS oversize - requires truck freight
- Made-to-order - may require 6-8 weeks for delivery
|
Perfect addition to our Standard or Deluxe '23 T bodies. Measures 20" long x 12" high x 39" wide. Bolt-on style, one-piece fiberglass with no floor or bottom panel. Note: Ships UPS Oversize.
|
These 1928-1929 Model A steel side splash aprons are exact including hump at the rear. 69.00 inches long. - Steel construction
- 69.00" overall length
- 7.75" overall width
- Natural finish
- SOld as a pair
|
If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted. Not recommended for cars newer than 1934.
|
This 1928-1929 Ford steel radiator front splash apron has original-style brackets riveted to the sides for attachment. These brackets have thread nuts welded to those brackets. Chopped 3". - Width side-to-side at rear of panel is 22-1/2”
- Width side-to-side at front of panel is 21-1/8”
- Front to rear at sides is 5-1/2"
- Front to rear at center is 4"
- Vertical height at sides is 8-1/4”
- 4 mounting tabs (2 per side) extend 1” past the above dimensions
- Mounting tabs have nuts welded to them for mounting
- Mount center side to side horizontal is about 24”
- Vertical mount spacing is 5-5/8” center to center. (this is approximate because of the angle difference on tabs)
|
These 1928-1929 Model A steel side splash aprons are exact and now available without the hump at the rear. Approximate length, 68".
|
Polished aluminum diamond style step plate with blank area for your original design. - Plate is 8.5" x 8"
- Blank script box is 4.5" x 2.25" and is centered on plate
- Mount holes are 7-5/8" x 6"
- Plate has bent 1-3/4" lip at inner edge
|
Polished aluminum diamond style step plate with 'Street Rod' script. - Plate is 8.5" x 8"
- Streetrod Script box is 4.5" x 2.25"
- Mount holes are 7-5/8" x 6"
- Plate has bent 1-3/4" lip at inner edge
|
Polished aluminum diamond style step plate with 'Hot Rod' script.
|
These polished aluminum diamond style step plates measure 8" by 8-1/2". They are designed to fasten to stock running boards of your classic car or pickup and replicate those of the originals. - Polished aluminum
- Diamond style
- 8" by 8-1/2"
- Sold as a pair
|
These pressed steel running board braces are riveted or bolted to the frame to give support to the running boards. These stamped steel brackets are made to fit 1928-1931 Fords but will work for all years. Choose front or back and left or right. When purchasing the rear, specify left or right side in the drop down. When purchasing front, left will work for both left and right sides. - Pressed steel
- 1928-1931 Fords
- 17-1/4" long front brackets
- 15" long rear brackets
- Choose front or back and left or right
|
|
|