Able to fit a 3 Deuce or Dual Quad System, this nostalgia Scoop is made of quality fiberglass and measures 23 ½" long by 13" wide & 5 ½" tall in the front tapering to the rear.

Carburetor Scoops start at $95.00 and are available with or without a cut-out for carburetors. Carburetor Scoop Kits are also available for 4-Barrel Manifolds & include: 1 machined & fitted Carburetor Scoop, 1 Air Cleaner, 1 Air Cleaner Cover, 1 Mounting Bracket & all necessary hardware to install & run, as pictured. If clearance is an issue when installing, Spacer Rings, as pictured, measure 1/2" tall & give your Carburetor Scoop more height.

Oversized valve covers provide that fantastic "large cubic inch" look at a fraction of the cost! Made of highly polished cast aluminum.

Will fit on any small block Chevy head up to 1986.

Comes complete with all neccessary mounting hardware.

Note: Does not clear intake manifold on supercharger application. Modifications to valve cover required.

You can have unlimited flexibility with these Teflon lined flexible braided stainless steel transmission dipsticks! Kits come complete with braided stainless outer housing and heat resistant E-Z to read Telfon inner rod. Inner rod is stamped with appropriate trans fluid levels. Machined aluminum handle and aluminum fittings complement Lokar's flexible engine dipsticks. Kit also includes dipstick funnel adapter to assist in filling. Designed for push-in style transmissions and features a double o-ring seal. Firewall mounted dipsticks measure 24" in length and transmount lengths vary per application.

Now Available By Popular Demand!

New GM Goodwrench 5.7L 350 cu.in. Small Block Chevy engine and TH-350 automatic transmission complete assembly.

Assembled as pictured with chrome accessories as a ready-to-run unit.

Includes 3 year/50,000 mile GM warranty!

Features Include:

• GM #10067353 Engine w/ 8.5:1 Compression and 270 HP.
• TH-350 Rebuilt Transmission
• Transmission Specialties 12", 2,200 Stall Torque Converter
• Chrome Oil Pan, Transmission Pan, Flywheel Cover, Timing Chain Cover, Valve Covers, Water Neck, Water Pump, Pulleys, Alternator, Alternator Bracket, and 14" Round Air Cleaner.
• Mallory/Pertronix Electronic Distributer w/ Black Taylor Spiro Pro Wires.
• Aluminum Intake w/ Edelbrock/Holley 600 CFM Carburetor.

Engine and Transmission Painted Black. Custom Colors (As Shown) Also Available At An Additional Cost To Match Your Specific Paint Scheme.

Other Upgrades Also Available - Contact Your Salesperson For More Information.

The first and only polyurethane motor mount with a safety interlock to effectively control torque! The clamshell style inserts into the existing O.E.M./stock metal clamshell brackets. Offers the strength of a solid mount with the vibration dampening of rubber.

NOTE: Polyurethane motor mounts are sold each. Make sure to order TWO mounts for a complete installation.

For Big Block and Small Block Chevrolets.

Replace standard rubber mounts with these solid mounts.

Stainless Steel Covers For Stock Rubber Small Block Chevrolet Motor Mounts.

Original GM Stock Rubber Transmission Mount For Use With Any Transmission Crossmember Assembly.

Motor And Transmission Crossmembers Specifically Designed For Use In A Total Performance T-Bucket Chassis'.

Completely adjustable transmission mount. Overall length 19" - 30." Bolt or weld to frame. Universal for Ford, GM, or Mopar automatic of standard transmissions. Adjustable ends included.

Adjustable 26" - 30" cradle-style motor mounts of 1-3/4" tubing, includes side-mounting ends. The 4" side-mounting ends are pre-drilled for easy mounting.End plates are 4" in length and slides on to mounts, allowing 8" of adjustability.

These breathers fit all valve covers with a 1-1/32" diameter hole.

High-quality die-cast aluminum.

These wire looms come completely polished with all brackets and fasteners. The two-piece design allows for easy mounting. Our universal model fits virtually all makes of motors. Choose the late-model type to fit Chevy's centerbolt valve cover heads.

Chrome steel upper and lower pulleys for Small Block Chevrolet with either long or short water pumps. Because pulleys are made to the correct GM specifications, these are highly recommended when using Total's upper or lower alternator bracket kits.

Designed for use with 350 turbo transmission and 8" Ford rear ends.

Fits Small Block Chevy.

Hi-tech braided stainless steel transmission kick-down cables from Lokar. Works great with matching throttle cable (TC1000HT) and return spring/bracket (SRK4000). Other applications available.

Flexible engine dipstick designed to coordinate with Lokar's flexible transmission dipstick.

Unique in its 12-point installation positioning and shifter rotation for precise fit. Brushed hi-tech knob, black or brushed billet knobs optional. Handles from 6" - 23" in length.

Bright chrome-plated knob with red eyes for universal fit. Die-case zinc. Matching tire valve stems available.

Unique design moves the stick out of the way to offer more leg room by mounting on the right-hand side of the transmission tail housing. Complete with neutral safety switch and reverse lockout. Sits flush with the floor when in park. No boot available.

Pre-formed lines with correct fittings to match your TP radiator and Turbo 350.

Zoops Inboard Mount Alternator And A/C Brackets Are The Perfect Solution Where Clearance And Alignment Are An Issue. Kits Feature A Simple Bolt In Installation With No Drilling For Mounting Holes Required. Zoops "Correct-Align" Design Allows Components To Be Adjusted Forward And Backwards For Proper Belt Alignment, A Common Problem With Aftermarket Components.

Kits Fit 1963 To Present Small Block Chevrolet With Short Or Long Water Pumps. Even Fits ZZ3 Aplications!

The unique three-piece design of this fuel filter will supply 1500 CFM systems. No need to disconnect fuel lines to replace the element. Made from 6061-T6 aluminum. Show polish finish. Available for both 3/8" and #6 AN line styles.