This Groundbreaking Roadster Is Like No Other Hot Rod EVER Built!

The Dearborn Deuce Convertible is just like any modern convertible. Developed in Detroit by American Specialty Cars, a global supplier of convertible top systems to the world's largest automakers. ASC not only designed the Dearborn Deuce Convertible but also produces it. One look at it's construction will convince you of it's high quality. Simply put - THERE'S NOTHING ELSE LIKE IT.

Features include:

* Fully integrated, completely concealed modern convertible top assembly with glass back window installed

* ALL STEEL body with a fully reinforced superstructure & intergrated wire run channels

* 3 1/2" longer doors for easier entry & exit

* Power side windows with glass installed

* 2" deeper cockpit for more legroom

* Polished stainless steel windshield kit with glass installed

* Flat trunk floor & 2 cubic feet of extra space

* Tops available in a variety of colors

Power door release kit specifically designed for the Dearborn Deuce! Kit includes two push/pull actuators, custom actuator mounting brackets, electronic receiver module, 30 AMP on-board relays, two wireless transmitters that provide "single-button" convenience and all required wiring, hardware and connections.

* 2 function kit can be used for opening of both driver's and passenger's doors.

* 3 function kit can be used for opening of both driver's and passenger's doors and well as the trunk.

* 7 function kit can be used for opening of both driver's and passenger's doors, trunk, remote battery disconnect, up/down functions of power windows, power trunk, you get the idea.

This kit moves the manual door release to a more convenient location. The original location on the Dearborn Deuce body package locates the manual release mechanism on the inner body structure and does not include the use of an inside handle release. This kit moves the mechanism up to the B pillar post for a more convenient and comfortable location. Drilling and tapping is required as well as slotting of the post for the inside handle.

Power trunk release/cable relocation kit specifically designed for the Dearborn Deuce! This kit not only provides a power trunk release kit, but also relocates the entire cable/electrical assemblies INSIDE the trunk walls, allowing a cleaner, safer trunk compartment. The original cable design in the Dearborn Deuce bodies place the linkage INSIDE the trunk area in plain veiw, which can be damaged or damage the contents placed into the trunk. Kit includes one push/pull actuator, bracketry and all required hardware.

This product is a must for your Dearborn Deuce!! Original design on this body will allow the doors to open to their fullest extent which will allow the hinge to come in contact the outer body skin. This will result in chipped paint and bending of the body. The door check kit will eliminate this problem and also allow adjustability of the doors to any opened position you desire. Requires welding to the hinge and also drilling of one hole into the steel reinforcing structure located behind the kick panels.

These heavy duty square washers are designed to replace the hex washer bolts used to hold the hinges to the doors. Slotted holes in these doors may become deformed while making final adjustments causing the material to become damaged. This washer kit will eliminate this problem.

Your upholstery shop will need these sill plates to finish the trim area of the rugs at the door opening. These show chrome plated stips will cover the edges of the rug as well as provide contrast to the beauty of the rest of the car. Kit comes with installation screws and does require drilling and tapping into the door opening.

Designed to eliminate the convertible top linkage from interfering with the opening and closed of the top. During the opening and closing of the top, the shoulder bolts supplied will catch on the interior panels covering the linkage. These replacement parts will smooth the operation of the top assembly. This kit does require drilling of the threads from your exsisting linkage design.

This finished floor insulation kit ia now available pre-cut to fit your Dearborn Deuce. The same product used in Nextel cars to remove heat from the driver's compartment has now been designed for use in the Dearborn Deuce. Pre-cut to fit and complete with mounting adhesive, this kit will save countless hours of making cardboard templates and requiring the purchase of more material than you will ultimately require.

This is a required item to cover the top assembly when folded down. Requires fitting and drilling for installation. To be upholstered to match interior.

Wiper assembly specifically designed for the Dearborn Deuce!! Features complete dual wiper assemblies, plus all required mounting hardware.

These swan neck mirrors have the class and style that the Dearborn Deuce requires. Mounts directly to the side of door.

Sold in pairs.

Patterned after the hot rod styles of the late 40's and made from high-quality, investment-cast, polished stainless steel.

Sold in pairs.